Enviro Polyurethane Floor Coatings

Enviro Floors | TIMBER 2 PACK | Timber Floor Finishes

Ordering several sizes/sheen levels?
For each combination you need:
  1. Select level of sheen
  2. Select size
  3. Enter a quantity for this combination
  4. Click 'Add to cart'
Price: $ 55.00

QTY:



Description

ENVIRO FLOORS TIMBER FLOOR FINISHES

DESCRIPTION
Enviro Floors Timber 2 Pack Polyurethane Coating and Timber Finish introduces the ultimate in non-toxic Polyurethane 2 pack technology.

Enviro Floors Timber 2 Pack Polyurethane Coating and Timber Finish is an excellent non-toxic Polyurethane replacement for toxic solvent coating that are used in both timber floor coatings and epoxy coating. This means that waterborne technology is finally exceeding the wear resistance of toxic solventbornes (via International Taber Abrader CS17 test), eliminating the last technical barrier to their use.

Enviro Floors Timber 2 Pack Polyurethane Coating and Finish exhibits strong hardness and exceptional heel and scuff mark resistance while maintaining great flexibility for edge bonding resistance. Enviro Floors Timber 2 Pack Polyurethane Coating and Timber Finishes is produced while 100% Polyurethane is mixed with a TDI free Polyisocyanate Hardener to give the ultimate in durability and toughness for a non-toxic coating.

TIMBER STAIN AND FINISH FEATURES

  • Non-yellowing
  • No carcinogenic Toluene Diisocyanate which is in all toxic solventborne polyurethanes
  • Great edge gluing resistance
  • Excellent sandability
  • Mixing of Enviro Floors Timber 2 Pack and the Enviro Floors Timber 2 pack Hardener just involves shaking
  • Waterborne and non-toxic (Federal Hazardous Substances Act USA)
  • No need for respiratory protection
  • High film build from viscosity / solids ratio
  • Deliveres natural timber finish
  • Brush, roller and applicator applyable

BENEFITS OF ENVIRO FLOORS AND WALLS TIMBER FLOOR FINISHES

IMPROVING FLOW & REJECTION
Add Enviro Floors Flow Aid is for use in improving the flow of any waterborne coating over a surface by lowering the surface tension. Flow Aid also assists in greatly reducing rejection and the ‘quilting effect’ between blocks of parquetry or timber boards from the effect of surface tension reduction and flow and wetting enhancement.

HOT WEATHER CONDITIONS
Add Enviro Floors Wet Edge Extender for the use with all waterborne polyurethane and acrylic based top coats and sealers. By the use of a food and cosmetic grade Humectant the water evaporation is reduced so as to enable more working time of the waterborne coating.

DRYING
In normal drying conditions of approx. 25 deg C, Enviro Floors Timber 2 pack Polyurethane Coating and Finish will be dry enough to take light foot traffic in 10 to 12 hours. Always test before walking on the floor. This will prevent any long term sock-prints. For next day use the floor with care, and a f ull cure will take typically 3 days.

RECOATING PREVIOUSLY COATED FLOORS
Enviro Floors Timber 2 Pack Polyurethane Coating and Finish use can by applied to recoating floors that have been previously coated with a 100% urethane or a Urethane / Acrylate (Bona, Toby, Polycure, Cabots, Wattyl). Nearly any solvent borne coating can be coated over with Enviro Floors Timber Coating. To be thorough, trial a test area to. Use the cross hatch test or call ENVIRO FLOORS AND WALLS for advice.

Wet scrubbing the floor with a scrubbing pad under the rotary nd using Enviro Floors Recoating Stripper is recommended prior to screening with a 150 grade paper or screen.

RECOMMENDED USES FOR 2 PACK TIMBER FLOOR FINISHES
Commercial - Restaurants, offices, hotels, resorts, dance floors, retail stores, multi-use halls where usage is severe.
Residential - Heavy duty requirements including rumpus rooms, kitchens, family rooms, etc.
Institutional - Nursing homes, schools

3 COAT SYSTEM FOR PROFESSIONAL TIMBER FLOOR FINISHES
Enviro Floors Timber 2 Pack (Timber Floor Finishes) are designed as a 3 coat system:
  - Coat 1 Enviro Floors Timber Sealer (Recommended)
  - Coat 2 Enviro Floors Timber 2 Pack (Timber 1 pack plus hardener)
  - Coat 3 Enviro Floors Timber 2 pack (Timber 1 pack plus hardener)

TIMBER STAIN 2 PACK SIZES AVAILABLE
1 & 5 Litres

SHEEN LEVELS
Satin, Matt, Gloss

TYPE OF PRODUCT
Water-based

NUMBER OF COATS
2-3 over Enviro Floors Timber Sealer

TO USE ON
Parquetry, timber, cork, MDF flooring and timber floating floors

APPLY TIMBER 2 PACK FLOOR FINISH WITH
Brush, pad applicator or 12mm nap roller

APPROX. COVERAGE
16m2 per Litre

RE-COAT TIME
4 hours

CLEAN UP WITH
Water

Download Information on Enviro Floors | TIMBER 2 PACK | Timber Floor Finishes and Coatings

Timber 2 Pack Part A SDSSafety Data Sheet - 2 Pack Part A (SDS)
Timber 2 Pack Part B SDSSafety Data Sheet - 2 Pack Part B (SDS)
Timber 2 Pack Part B SDSProduct Information Sheet - 2 Pack (PDS)You will need Adobe® Acrobat® Reader to view PDF documents. Click Download for a free copy from Adobe Website

2 Pack Timber Floor Coating | 2 Pack Sports Floor Coating